adding a second hard disc to windows 98

  01chris 16:17 23 Mar 05
Locked

i am fairly new to computing and would like to know how I go about adding a second hard disc to a pc running windows 98 (please tell me what positions to put the jumpers if there are two drives on one ide cable) and all the rest of the information about installing a second hard disc

thanks

  Diodorus Siculus 16:23 23 Mar 05

Set the jumpers as slave on the new drive. Then connect it to the ide cable and power cable.

Reboot and you will probably have to use a program like fdisk click here to parition it and then format from within windows.

  Diodorus Siculus 16:24 23 Mar 05

Cyber Tech Help - How to Install A Second Hard Drive as a Slave Drive in Win98 (Part 1)
click here

  goonerbill © ® 16:27 23 Mar 05

there are limitations on what size hard drive you can install in your pc due to having win98 and motherboard bios. if you can post back what motherboard you have, one of the other forum members will be of more assistance( can remember what max. hard disk size was with 98, 8gb i think). if you dont know what your mobo is use this link and download the home version and it will tell you anything that someone will ask you.

everest link....... click here

  01chris 16:33 23 Mar 05

so what is the cs jumper bit for?

ps thanks for quick response

  pj123 17:31 23 Mar 05

I have an 80gb (partitioned 2 x 40gb) and a 120gb (partitioned 1 x 20gb and 1 x 100gb) hard drive running on win 98SE no problems. They are both Maxtors and I did have to use Maxblast to set them up, a lot depends on your motherboard and BIOS.

BTW cs = cable select. I have never used it myself. (apologies to D-S)

  Diemmess 17:42 23 Mar 05

CS or CSL is a setting which allows your computer to sort itself out!.... this can be the best way, but will depend on the age/type of motherboard.

If you really mean you are inexperienced, then please consider unplugging the present HD while you are partitoning and formatting the new one(either power cable or data cable).... this way prevents the possibility of tears by selecting the wrong HD for format!

Again it depends very much on your hardware as well as 98SE, how large a partition can be recognised.

If you can download the correct manufacturer's "instant installation program" eg Maxblast for Maxtor HDs, you will have to rely on your 98 setup floppy.

Whichever, boot from the floppy and FDISK, and later FORMAT is available on that one, or tranfer the manufacturers download to a floppy and use that, its much much faster.

  Diemmess 17:46 23 Mar 05

If you can download the correct manufacturer's

  Diemmess 17:48 23 Mar 05

........If you can download the correct manufacturer's...............
Should read CAN'T not can.

  Fruit Bat /\0/\ 18:17 23 Mar 05

This thread is now locked and can not be replied to.

Sony Xperia XZ Premium review: Hands-on with the new 4K HDR phone with Motion Eye camera and Snapdr5…

1995-2015: How technology has changed the world in 20 years

Best laptop for design and art 2017: we test Apple, Dell, HP, Lenovo and Microsoft's best models…

CarPlay tips & troubleshooting guide: CarPlay tips & troubleshooting guide: Get the most from…