connection problem

  dumperman 16:34 06 Dec 09
Locked

hi i have a dvd recorder and skybox i want to connect to a tv the dvd has 2 scarts the tv also2 .i have tried always to connect them but i can get sound when i record but no picture.i live in france if tat makes any difference?

any help would be much appreciated.

thanks in advance.
dumperman

  howard64 17:43 06 Dec 09

I found that the only way I could record from the sky box was to use one of the auxiliary channels

  De Nada 19:33 06 Dec 09

The way i have mine setup is as follows,

scart to the lower socket on sky box,

from sky box to the ext 2 on dvd recorder,

scart from dvd recorder to ext 2 ( or similar),

on tv.once connected turn it all on,then go to your remote on tv and dvd and go through your av connections,

  BRYNIT 20:05 06 Dec 09

The usual way to connect via a scart lead is.

Sky box Scart/AV1 usually the top Scart connection to TV either AV1 or AV2

Sky box Scart/AV2 bottom scart connection to DVD recorder you will need to record from the AV2 channel.


DVD recorder Scart/AV1 to TV either AV1 or AV2

If you have recorded sound but no picture this could be due to faulty or loose scart lead.

1. Scart lead is loose. Check lead remove and reconnect at both ends.

2. Faulty scart lead. Try another scart lead.

This thread is now locked and can not be replied to.

Surface Pro (2017) vs Surface Pro 4

20 groundbreaking 3D animation technologies coming to Siggraph 2017

iPad Pro 12.9 vs Surface Pro 5