How to get Windows 10 now: how to download and install Windows 10 even if GWX.exe is missing
Hi all....I've got a vintage desktop..circa 1999..and I want to use it by way of my existing wireless router. I bought a usb wireless adapter which just wouldn't work.....I presume because my old processer is 780mhz and the dongle states a minimum 1ghz processor. Is there a dongle that would work with such an old pc? Cheers Pete
Perhaps a pci card rather than usb? like this
I'm guessing the prob with USB wireless dongle could be one of:
--- It requires USB 2.0 and PC is only USB 1.1
--- It requires drivers that you haven't installed or, if you have, are not compatible with the OS you have on the old PC (what is it Win98, WinME or what?).
Would be useful to know what OS you have anyhow.
I doubt if the processor speed is the real issue as such "stated requirements" are often wide of the mark.
As Miké has already stated, a PCI card (to go inside the system unit if there is a spare PCI slot) might be a better option. But whatever you go for, you need to make sure it comes with drivers for the PC's OS.
Also, what do you want to use this old PC for? Chances are it will be painfully slow (by today's standards). Everything about it will be slow (the processor, the bus, the hard disk). All this stuff has come on in leaps and bounds since 1999. Also, unless the OS is at least WinXP, it will likely be very insecure.
Also, USB controller (i.e. the USB kit inside your computer, not the USB device that you plug-in) support in older OSs was patchy (seeclick here. So unless you know that the USB ports on the PC are actually working (e.g. have been used for other purposes before), you might be on a hiding to nothing with the dongle.
Thanx guys.....yeah, the thread title was an error...i'd just got back from the pub! Anyway....The OS is windows XP and the dongle came with a cd driver which I installed as per instructions. When I plugged the dongle in initially, it started connecting the disconnecting with the wireless signal every 3 or 4 seconds with an error message "cannot connect..certificate needed" or words to that effect. After several driver uninstallations & reinstallations, when I plugged in the dongle it just turned the system off and tried to reboot but wouldn't untill I unplugged the dongle. So I gave up. But the question is, I guess, is the processor not powerful enough?? Why state "Minimum processor: pentium 1 Ghz or more" and is there a dongle out there that should and could work? Batch....it's a 2nd computer for the bedroom which worked just fine for everyday surfing and stuff.
This thread is now locked and can not be replied to.